SK hynix is building Trinity Fab, an open semiconductor test bed worth 874.6 billion won (about $655 million) inside its first fab in the Yongin cluster, South Korea. Described by the company as the world's first open semiconductor test bed, the facility will let smaller suppliers test materials, parts and equipment under conditions nearly identical to those of a commercial memory production line.
Trinity Fab sits on the third floor of the first phase of the Y1 fab in Yongin, Gyeonggi Province. The cleanroom covers 3,305 square metres: about 2,645 sq m will be used for evaluation under mass-production conditions, and the remaining 661 sq m will be divided into 15 rental rooms where suppliers can install their own equipment.
The facility will house 51 pieces of equipment of the same types used in commercial production, including 26 front-end process tools, 11 metrology and inspection tools and 14 auxiliary tools, covering steps such as lithography, etching, deposition and cleaning. The scanners will use argon fluoride immersion lithography (ArF), not extreme ultraviolet (EUV) — although the company says it could consider adding EUV tools later.
What an open test bed is for
The problem Trinity Fab tries to solve is an old one: even after developing a promising prototype, smaller suppliers struggle to prove that their product works reliably in mass production, especially without the resources to build their own test facilities. Proximity to SK hynix's production line is the main selling point — suppliers will be able to evaluate products under the same temperature, cleanliness and utility conditions as a commercial fab, reducing rework when moving to production.
According to Lee Ki-jung, CEO of the non-profit Trinity Fab foundation — which will operate the facility and who is a former SK hynix executive vice president — data obtained from validation at the test bed is very likely to be reproduced as is on a real production line. The foundation hopes to shorten the time needed to commercialise new technologies by at least 30% — an estimate from the foundation itself, which did not explain how it arrived at that figure.
An example cited during the press tour of the construction site on 16 November came from equipment maker TES: evaluating a new material typically takes six months to two years, partly because companies must first identify suitable equipment and secure time to use it. TES has already built its own research centre of about 3,300 sq m near the Yongin complex — an investment that, according to a company executive, might not have been necessary had Trinity Fab existed earlier.
Timeline and funding
Trinity Fab is scheduled to open in May 2027, with full operations starting in the fourth quarter of 2027. The companies that will use the facility have yet to be selected: an independent evaluation committee under the foundation will review applications.
The project is funded jointly by SK hynix, the central government and local authorities. SK hynix provides the space and assigns engineers to operate and maintain the equipment and oversee safety, without charging the foundation; participating suppliers will pay a minimum usage fee, yet to be determined.
Separately, press reports on 16 November described a 1.4 trillion won (about $1 billion) SK hynix package of financial support for its supplier network over five years — a cash-and-credit package aimed at small Korean materials, parts and equipment firms on which memory production depends.
The Y1 fab, which will produce DRAM, is about 89% complete, and its first cleanroom enters operation in February 2027. Trinity Fab is only one part of a much larger development: SK hynix plans to build three more fabs in Yongin by 2033, with planned capacity of between 1.2 million and 1.44 million wafers a month — and more than 600 trillion won pledged for the project. Another 460,000 sq m to the north has been reserved for a cluster of materials and equipment suppliers.
The move comes amid the race for AI memory capacity: with demand running hot for HBM and DRAM for accelerators, SK hynix has accelerated its expansion plans — in August, the board approved 54.3 trillion won for two new fabs, Y2 in Yongin and M17 in Cheongju.
Image credit: view of SK hynix's Y1 fab in the Yongin cluster, 10 November 2026; photo by Lee Jae-Lim, Korea JoongAng Daily.
Sources
- Korea JoongAng Daily — Inside SK hynix’s $655 million chip test bed (16/11/2026)
- ValueWalk — SK hynix’s 1.4 trillion won supplier war chest behind Trinity Fab
- Geekiki — CXMT announces server DRAM modules and pressures Samsung and SK hynix
This article was produced with the assistance of artificial intelligence, based on cross-referencing public posts and internet sources. Consult the original sources to confirm the information.
Por Muse